USB Driver Downloads‎

Software Blackberry Reparación Stuck 75 de error 100 solution see this software enjoy it

Saturday, April 18, 2015

Software Blackberry Reparación Stuck 75% de error 100% solution see this software enjoy it

1st Update of 2014 - and again FIRST in the world Samsung tool 16.8 use full update

Software for easy use.
Problems eradicates 75% Other
One software contains loader: 9900, 9860, 9930, 9850, 9360, 9320, 9220, 9790, 9380, 9810.

Link--->

Blackberry repair Stuck 75%.rar

Wednesday, April 15, 2015

Nokia 5250 MIC Jumper Ways Problem Solution

This is the Nokia solution for 5250 Mic, mouthpiece microphone is not a problem. The solution repair guide below simply shows the paths connecting the microphone to solve problems.
Nokia Asha 200 Charging Problem Solution Jumpers Ways

Just follow a few simple tips on how we the microphone problem on Nokia phones Nokia 5250 to solve.
Nokia 5250 mic microphone problem can be solve with a few steps that i am going to write here if you are facing no mic voice is going forward or low voice goes to destination then you can check mic replace mic with new one.
there are two main colors in this diagram red and blue as you can see easily so these two lines are defining main path of links check these links and if any of them is broken then make these jumpers as define in diagram attached with this post.if any component is damage you can replace it also with same value parts.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.

Sunday, April 12, 2015

Heres the solution that may possibly help fix and repair a damaged or malfunction qwerty keys on Nokia N97. This solution works if the N97 qwerty keypad membrane is already been replaced but some of the keypad keys still not responding.

The solution below shows the line paths of the Qwerty keypad connection of Nokia n97 PCB Board. This connection pattern shows the tracing guides including the qwerty keypad filter IC through to the Keypad pin connector.

Nokia N97 QWERTY Keypad Failure Solution

N97 Keypad Filter IC Jumper Ways

There are two keypad filter chips used on Nokia N97 keypad circuits. You may check and replaced these EMI-ESD filter IC after ensuring that the QWERTY keypad membrane flex seems working fine and or already tried to replace a new replacement spare. Check and ensure also that keypad Pin connector are of free from dust and oxidation build up.

Thursday, April 9, 2015

Samsung Galaxy Star Pro GT-S7262- How to Install S7262XXUANB1 Android 4.1.2 Jelly Bean Firmware,S7262XXUANB1 Android 4.1.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. Samsung Galaxy Star Pro GT-S7262 recently received a new official firmware update which is XXUANB1 Android 4.1.2 Jelly Bean. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is S7262XXUANB1. However, the firmware is currently out for Nepal. Hope the firmware will hit other part of the world soon. The Galaxy Star Pro is a low range Android Smartphone by Samsung, released with Android 4.1.2 Jelly Bean. The device already received many regular firmware update and here we have the latest available firmware for the device. If you own the Smartphone and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the S7262XXUANB1 Android 4.1.2 Jelly Bean Firmware manually through Odin.

As the Galaxy Star Pro released with the Android 4.1.2 Jelly Bean and not yet get Android 4.2.2 Jelly Bean or later android version, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy Star Pro S7262 to the latest XXUANB1 Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 XXUANB1 firmware on your Galaxy Star Pro S7262 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Star Pro GT-S7262 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.1.2 Jelly Bean S7262XXUANB1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Star Pro GT-S7262 model.

Nepal: NPL-S7262XXUANB1-20140226104403.zip

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Samsung Galaxy S4 GT-I9500- Simple Tutorial How to Root I9500XXUFNB3 Android 4.4.2 KitKat Firmware

Samsung GT-I9500 Android 4.4.2 KitKat Firmware Download I9500XXUFNB3 for Russia SER working firmware download now.

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNA6 Android 4.4.2 KitKat Firmware.

Samsung GT-I9500 India INU- Android 4.4.2 Official Firmware Update guide

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 S7262XXUANB1 official firmware on Galaxy Star Pro S7262.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Star Pro S7262 through Odin:

Download Android 4.1.2 XXUANB1 Firmware for Galaxy Star Pro S7262 from the above list
Download Odin 3.09
Switch off your phone and boot Galaxy Star Pro S7262 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Star Pro S7262 to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: S7262XXDLJ5_S7262ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congrats! you have complete the tutorial to update Android 4.1.2 Jelly Bean official firmware on Galaxy Star Pro GT-S7262. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Star Pro should now running on the latest Android 4.1.2 Jelly Bean build version XXUANB1. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.

Monday, April 6, 2015

Update Your Sony Xperia Acro S to Jellybean 4.1.2 Firmware 6.2.B.1.96 (All bug fixed)

Few Bug Fixes that has been reported so Far has Include

[Hard reset]All Sony & Ericsson Andorid phone(for Google lock-User lock-delete data)

1080p Video Recording Fixed.
All kernel related bugs are gone.
Volume Up bug has been fixed.
Screen unlock bug has been fixed.

Download LINK

-----------------------------

For write this file you should use flashtool latest version you can use this links :
[Guide] Sony Flashtool : The latest version

[How to Update] Any Xperia Phone Using FTF File & Flash Tool

Friday, April 3, 2015

Samsung Galaxy Tab 3 10.1 GT-P5200- How to Install P5200XXUANB2 Android 4.2.2 Jelly Bean Firmware,P5200XXUANB2 Android 4.2.2 Jelly Bean Firmware Last Updated on 26-Feb-2014. Samsung Galaxy Tab 3 10.1 GT-P5200 (3G+WiFi) recently received the latest XXUANB2 Android 4.2.2 Jelly Bean official firmware. Samsung recently rolled out an OTA update about the firmware. However, the firmware is out for Italy. Hope the firmware will hit other part of the world soon. The Galaxy Tab 3 10.1 P5200 was released with Android 4.2.2 Jelly Bean out of the box and there is no news about any further android version update for the device. Here we have the latest available firmware for the tablet. If you own the device and not yet updated this latest available firmware then do it now by following the tutorial below. The below guide will help you to download and install the P5200XXUANB2 Android 4.2.2 Jelly Bean firmware manually through Odin.

The Galaxy Tab 3 10.1 P5200 was released back in the year 2013 with Android 4.2.2 Jelly Bean and yet to receive Android 4.3 Jelly Bean or later android version. As the device already running on the Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update.

So, want to update your Galaxy Tab 3 10.1 P5200 to the latest XXUANB2 Android 4.2.2 Jelly Bean firmware? For official way, either you can go for OTA (over the air) from Settings-About Tablet-Software Update or download firmware through the Samsung Kies utility. However, if you are looking for a manual way to update the latest Android 4.2.2 XXUANB2 firmware on your Galaxy Tab 3 10.1 P5200 through Odin then follow the step by step manual update guide below.